When refueling machine, if found insufficient oil how to do

If you find that the amount of oil displayed by the tanker is insufficient during the refueling process, you can follow the following steps to deal with it:

First, preliminary inspection and confirmation

Confirm the amount of fuel: First, confirm that the amount of fuel displayed on the tanker is indeed less than expected. This may be due to not paying attention to the fuel gauge reading before refueling, or a misunderstanding of the vehicle's fuel tank capacity.

Check the fuel gun: Check that the fuel gun is fully inserted into the tank port and ensure that there are no leaks or dripping oil. If the refueling gun is not tightly inserted or poorly sealed, some fuel may overflow and not enter the tank.

Second, communicate with the gas station staff

Immediately inform: Once you find that the amount of oil is insufficient, you should immediately stop refueling and report the situation to the gas station staff.

Check: Please check whether there is a fault or inaccurate metering of the tanker. You can request rerefueling or a fuel review.

Third, possible reasons and solutions

Refueling machine failure:

Metering error: there may be metering error in the refueling machine, resulting in the display of oil and the actual amount of refueling does not match. At this time, the gas station should use standard measuring instruments for calibration, and adjust according to the calibration results.

Mechanical failure: The mechanical parts of the refueling machine (such as Flow meters, sensors, etc.) may fail, affecting the measurement accuracy. Contact professional personnel to repair or replace the faulty component.

Improper operation:

Early drawing: Pulling out the fuel gun in advance during the refueling process may cause some fuel to not fully enter the tank. At this point, the refueling gun should be reinserted and continue refueling to the required amount of oil.

Misoperation: If you mistakenly touch the stop button on the refueling machine or choose the wrong refueling method (such as the preset amount rather than the preset amount of oil), it may also lead to insufficient oil. Check the operation carefully and refuel.

Other factors:

The tank is full: If the tank is full but the refueling officer does not find it in time, continuing to refueling may cause fuel overflow and indicate insufficient fuel. At this point, stop refueling and check whether the tank is full.

Pipeline leakage: There may be leakage points in the refueling pipeline, causing some fuel to be lost during delivery. The leak should be checked and repaired by a professional.

Fourth, follow-up treatment

Record and feedback: Record the problems encountered in the refueling process in detail, and feedback to the gas station or relevant departments. So that they can take timely measures to improve service quality and improve equipment performance.

Keep evidence: If necessary, you can take photos of the display screen of the tanker and the mouth of the fuel tank as evidence. In order to protect their rights and interests in the follow-up process.

Fifth, preventive measures

Regular inspection of the refueling machine: the gas station should regularly check and maintain the refueling machine to ensure its measurement accuracy and normal operation.

Strengthen staff training: improve the professional skills and operational level of refueling personnel, reduce the problem of insufficient oil due to improper operation.

Provide quality service: gas stations should uphold the concept of honest management and provide quality refueling services. To respond positively to customer's problems and deal with them properly.

Wenzhou Jiahao Petroleum Machinery Co, Ltd is a professional manufacturer of petroleum machinery products since 2010. The main products are Fuel dispenser components including Automatic Fuel nozzle, Adblue DEF Nozzle, Vapor Recovery Nozzle, Flowmeter and Fuel pumps.